Sleeves are assembled-joined with pipe on sleeve joining machine.
Sleeve joining machine should be placed near pipe hydro-testing machine, because according to customer requirements pipes are assembled with sleeve joint.
Pipe transport and movement between machines is foreseen by means of pipe transport trolleys and support beams for pipe rolling.

OGM is foreseen for pipe cutting and grinding operations off line. Off line cutting and grinding is needed when shorter pipes, pipes for fittings or some repair work are required.
The pipe is supported by support wheels. Equipment is complete with electric power box and is completely wired. During cutting and grinding, dust is a side product. Grinding and cutting tool are connected by flexible tubes with suction line and dust filter.

SJM area and height required:

• Width = 3 m
• Length = 17 m
• Height = 3,5 m

Utilities requirements:

• Max. Power Consumption = 5 kW

Main characteristics of the SJM machine:

• Pipe length: up to 12000 mm
• Pipe diameter: 300-2600 mm for SJM2600 and 300-4000 for SJM4000

SJM Operators Requirement:
(workers per shift)

• 1 machine captain
• 1 machine operator

OGM area and height required:

• Width = 7 m
• Length = 14 m
• Height = 2,5 m

Utilities requirements:

• Max. Power Consumption = 40 kW

OGM Operators Requirement:
(workers per shift)

• 1 machine operator